Today I sanded the base of the bridge to fit the curve of the top, shortened the ends a about 15mm each side, fitted the tail piece , reversed the order of the fingers so the low E has the long arm, ( looks better and from all accounts makes no difference ) and drilled an earth wire hole from under the tail piece into the switch cavity, not much room in there, the big pots I have wont fit through the F holes, Bournes mini's do, push pulls only just make it for depth. While I was doing that a package from Germany arrived with my Duesenburg tuners and switch knobs. I love the tuners already. You feed the string down the centre of the tuner post, cut it off on the back of the headstock and tune up! So simple. Tomoorrow I will fit the neck ( but not glue yet )