I agree with Waz, Alkay. Capo on the 1st and depress at the 12th and check the height at the 9th. If you are going to do any further guitar building, I would get a notched straight edge.
I agree with Waz, Alkay. Capo on the 1st and depress at the 12th and check the height at the 9th. If you are going to do any further guitar building, I would get a notched straight edge.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thanks Waz and Andy. I'll give that a test tomorrow and let you know how I go.Originally Posted by Andy40
Good advice on the notched straight edge. You save me asking that question
Cheers,
Alkay.
Reply With Quote
