Wound strings might help but the G, B & E being unwound would most likely do nothing.
You could either keep sanding the base down or order a bone nut which may also need a bit sanded off the base too.
Wound strings might help but the G, B & E being unwound would most likely do nothing.
You could either keep sanding the base down or order a bone nut which may also need a bit sanded off the base too.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
I was thinking about that but thought I would ask incase someone had a trick up their sleeve hahaha.Originally Posted by wazkelly
Might be time to invest in some nut files and fret leveling tools.
I could keep sanding the base but I don't think I can go any lower. A business card just fits between the top of the 1st fret and the low E string when a capo is placed over the 3rd fret so I'm not sure if I should go lower.
Last edited by Alkay; 23-10-2016 at 07:39 PM.
Reply With Quote
