Hey Euroa, thanks for the explanation, the tone blocks is a great idea and looks like a plate from the outside. So have you just routed a small cavity for the strings to go through the body or drilled holes between the block and bridge?
Hey Euroa, thanks for the explanation, the tone blocks is a great idea and looks like a plate from the outside. So have you just routed a small cavity for the strings to go through the body or drilled holes between the block and bridge?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Holes drilled through from the front to correspond with the bridge string spacing (I did drill these oversize) then a simple 12.7mm 1/2inch slot routed in the back to drop in the block, I drilled the the treble and bass E string holes right through as reference points and then used these to line the block up from the back. THen drilled the rest of the hole to the routed cavity (if that makes sense)Originally Posted by wokkaboy
Posting Permissions
Reply With Quote