Results 1 to 10 of 23

Thread: Discussion on developing Build Your Own Amplifier Cab

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #8
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,552
    Here's a tip:


    To make it easier to transport your new Speaker Cab short distances, consider installing a set of Casters on the bottom of it, and a couple of carrying handles on the sides, saves hurting your back, which is not a fun thing to do, believe me, you can buy Casters from your local Big Green Shed (i.e. Bunnings), I tend to use the grey coloured ones that have an integral braking-lever system, works a treat.


    These are similar to the ones I installed on my Marshall amp, you need four of them:

    https://www.bunnings.com.au/ambassad...astor_p3940241


    While at your local Big Green Shed, also buy a pack of 8G X 20mm Timber screws, these are perfect for attaching your new Casters to your Speaker Cab, they work a treat.
    Last edited by DrNomis_44; 18-09-2016 at 06:14 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •