DrNomis_44's Gold Standard STA-1M Build.

[wokkaboy]

looking good Doc, so the axe should be called Goldmember hahha

if you have any gold paint left I would go over the discoloured areas again

[DrNomis_44]

looking good Doc, so the axe should be called Goldmember hahha

if you have any gold paint left I would go over the discoloured areas again

Hahahaha....that's actually not a bad idea at all mate, I might just revise my Headstock Decal design so it reads like this:


Doc's Guitars
Goldmember


Or:


DOC'S GUITARS
GOLDMEMBER


But do the word "Goldmember" in the same style as used on the DVD label for the movie, I reckon that'd look cool.



I think there may just be enough Gold paint left in the can for one more coat, but I really want to let the last coat have a decent amount of drying time so I don't have any more stuff-ups to fix, seeing as I'm so close to finishing it mate.


I'm going to do a materials shopping-list for tomorrow, and see if I can check online if Officeworks stock the Waterslide Decal paper I need, might save me some time, also going to pop into Jaycar Electronics for some stuff too, as well as do the Big Green Shed visit for the Orange and White paint for the pedals.


My Canon MG2560 Printer can print in colour, so maybe I could have the word "Goldmember" in either a Yellow, or a Greeny-Gold colour.


I just found this website which could prove useful for designing the Headstock Logo:

https://fanart.tv/movie/818/austin-powers-goldmember/


Now, what if I were to use that, but replace the words "Austin Powers" with "Doc's Guitars", wouldn't that look fully-sick on the Headstock?