Switching necks

[wokkaboy]

Hi Chuck, no worries if you are cool with doing the routing mods then go for it. I would estimate the bridge would need to move toward the nut about 24mm (19mm scale length difference + 5mm correction) so I think the tele bridge plate will cover the existing bridge pup cavity.
The Gibson type bolt on necks available at PBG shop have only got dot fret markers as far as I know, only the set necks have trapezoid and block markers. I think the Gibson bolt on necks have a square heel so should be interchangeable.
What is the reason do you want a 3 + 3 tuner config on the headstock ?

[Chuck]

What is the reason do you want a 3 + 3 tuner config on the headstock ?

It wasn't really a fully formed idea - it's more that I like the idea of creating things that are a bit different (I'll be doing some reshaping of the body on the TL1 kit when it arrives). It was more about knowing what options I might have. I've built a couple of guitars from scratch previously, so understand a little about the construction process - for me the kits here are something to use as a basis for a new idea, rather than faithfully following the assembly process. Of course it could also go horribly wrong!