If you don't have the right tools to cut string slots best to buy one pre cut otherwise things could end up messy and less than perfect.
If you don't have the right tools to cut string slots best to buy one pre cut otherwise things could end up messy and less than perfect.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
the blue looks nice, and will and shoe polish to my trips and tricks folder...
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Did you have to water down the shoe polish somehow? The neck must smell "interesting" now.
(BTW, I don't think that neck is mahogany, the grain looks like the Chinese maple the rest of the necks are. I could be wrong, but I've never seen mahogany that looks like that.)
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
No just used a cloth similar to any oil, but small amounts, many coats as wokka said if you see earlier pics you get an idea. Neck smells like a Footy boot. Got the idea off another site. The idea is too keep the neck very resonant. But also a way to explore cheap ass options, the idea behind this build is cheap hacks so to speak.
Hey Fretty I reckon the neck is mahogany, if you look at the pics posted before look how much darker the headstock is compared to the maple fingerboard. Could be wrong
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
haha good one Franken, well what about the lastest Aussie motorsport drivers craze doing a 'shoey' - fill your race boot with champagne and skull it hahha
Last edited by wokkaboy; 09-08-2016 at 03:50 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I once was forced to Skoll a complete pint from the 4th Grade premiership trophy we had just won. Pretty sure that hadn't been cleaned since the last time it had been awarded (or possibly the first time it had been awarded). I imagine that would probably be in the same league of grossness.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
ahha funny story Franken, you should have at least had the trophy rinsed before the pint was poured. There was probably cobwebs, dust, dead insects in there - ewwwwwwwwwwwwww
What was the sport Franken rugby ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in