Great colour, those pups look sic!!!!
Great colour, those pups look sic!!!!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Body front has been resanded and restained happier with the result now, still need to scrape back the binding.
Neck heal shows material to be removed.
Thought the new pups felt heavy for a single coil all be it in a humbucker case, scale weights are interesting when compared to kit supplied humbuckers ??
Not sure yet how to attack the fretboard, the mots inlays are crooked from about the 12th fret on, was going to replace them with either gold mop or pink mussel and stain the fretboard ebony.
The dilemma is should I remove all the frets for easier access to inlay and for sanding filling staining etc and refret, given also that the neck is bound?
All thoughts and suggestions welcolme!![]()
Last edited by euroa guitars; 25-07-2016 at 09:01 AM.