Dedmans build 4 ES5-V

[FrankenWashie]

sounds good Dedman, always a bonus when the frets are level out of the box ! Less work = win !

How often does that happen?

[Dedman]

first time for me, never had a bad one but usually at least one needs a tap or bit of sanding

[FrankenWashie]

Good to know, I have yet to even look at that on the EXA-1 as its been fighting me on finish, given what I put the FB through in stripping it and refitting and the subsequent re-working of the neck I don't hold out much hope for it not needing work.

[Dedman]

wired the ES5 this afternoon, well, on the cardboard template anyway. Almost the same as the Jnr with a push pull to split the mini humbucker on the volume except this one has a tone pot as well.

[wokkaboy]

good stuff Dedman sounds like you are a wiring and soldering guru by now ! Should be a fairly straight forward circuit. Will the larger push pull pot fit through the F hole or does it have to come through the pup cavity ?

[Dedman]

I didn't try it in the F holeI can feed it all in the pick up hole

Not a guru I just have the link to http://www.guitarelectronics.com... find a diagram, print..... solder

[FrankenWashie]

I didn't try it in the F hole I can feed it all in the pick up hole

Sooo very many bad places we can run with that statement. Just sayin'.

[wokkaboy]

bwhahha Franken you have a filthy mind mate !!

[Dedman]

I fed the bait, was waitin to see who took it LOL

[stan]

Deddy , you are a bad , bad , man, I like you