ST-1 By nitroburner1000

[stan]

Ouch, this acrylic dries between 1 and 2 days. Thanks for compliment stan.

cool, where did you get it?

phrozin has it spot on, my clear is over stained wood, you may be having more luck over a colour

[nitroburner1000]

cool, where did you get it?

phrozin has it spot on, my clear is over stained wood, you may be having more luck over a colour

You could be right, timber is a lot more porous, although if you grain filled it it should be ok. I will be using it over my next one which will be stained.Our local "The Paint Place" stocks it, but if they dont have it they probably could get it for you. Id be very careful about putting it over your acrylic until its properly cured. As everyone here tells you, try a sample first. Good advice.

[stan]

You could be right, timber is a lot more porous, although if you grain filled it it should be ok. I will be using it over my next one which will be stained.Our local "The Paint Place" stocks it, but if they dont have it they probably could get it for you. Id be very careful about putting it over your acrylic until its properly cured. As everyone here tells you, try a sample first. Good advice.

cheers nitro, once mine cures it will be ready to finish off, so nothing going over it

[nitroburner1000]

cheers nitro, once mine cures it will be ready to finish off, so nothing going over it

ok stan, plz send me a link when its done would love to have a dekkers.