Fender3x probably best solution is to get some binding same colour, I guess it's cream. Chop it into small pieces and soak it in pure acetone. Eventually it will turn to a liquid state so use this to fill the gap. Then wait for it to cure then sand it flush as you can. Good luck.
As Franken mentions the other gap will have to be filled with wood filler, try and choose a colour that will match
Last edited by wokkaboy; 11-07-2016 at 03:42 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote