Page 3 of 11 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 105

Thread: Andy40's ES-1G Build

  1. #21
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    nice upgrades Andy, mega keen to hear how the Rebel 90's sound. When you got 3 or 4 builds on the go at once at least one or 2 builds have to be neglected !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #22
    Overlord of Music gavinturner's Avatar
    Join Date
    May 2013
    Location
    HOLGATE NSW
    Posts
    3,057
    I'm also very interested in how the Rebel 90s sound! A great choice by all accounts..

    cheers,
    Gav.
    --
    Build #01: BC-1
    Build #02: ST-1
    Build #03: JR-1DC
    Build #04: ES-2V
    Build #05: ESB-4 (GOTM July 2014)
    Build #06: RC-1
    Build #07: MK-2
    Build #08: TLA-1
    Build #09: JR-1DC
    Build #0A: LPA-1
    Build #0B: STA-1 (GOTM April 2015)
    Build #0C: MKA-2
    Build #0D: LP-1M
    Build #0E: JB-1
    Build #0F: FS-1

    Find me:
    https://www.facebook.com/firescreek.guitars/
    http://www.guitarkitbuilder.blogspot.com.au/

  3. #23
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    Thanks Gav and Wokks, I too am mega keen to hear those babies sing. I don't have a guitar with P90's.....not sure what the feedback will be like in the semi-hollow but we'll see.
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

  4. #24
    Member Fuzzbeard's Avatar
    Join Date
    Sep 2015
    Location
    Chinchilla, Qld
    Posts
    220
    Those Rebel90s are great I put a set in an ST-1 kit but I am about to transplant them into my Epiphone Les Paul Custom.

  5. #25
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    Nice Fuzzy, what are you putting in your ST-1
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

  6. #26
    Member Fuzzbeard's Avatar
    Join Date
    Sep 2015
    Location
    Chinchilla, Qld
    Posts
    220
    I still have the original scratch plate for the ST-1 so I am still deciding on a set of single coil pups for it, I am putting the rebel 90s in the Epiphone LP to get all shiny and gold again because a couple of years ago an old mate borrowed it as a "Backup" guitar for ONE gig and it came back covered in sticky filth which he had made no attempt to clean off and when I did all of the gold came off everything but the grovers. Sorry for rant I was not happy with him. So I am going to polish the rest of the gold off the Epiphone humbuckers so they look chrome and install them in my ES-1G when I pull my finger out and start work on it again.

  7. #27
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    Quote Originally Posted by Fuzzbeard View Post
    I still have the original scratch plate for the ST-1 so I am still deciding on a set of single coil pups for it, I am putting the rebel 90s in the Epiphone LP to get all shiny and gold again because a couple of years ago an old mate borrowed it as a "Backup" guitar for ONE gig and it came back covered in sticky filth which he had made no attempt to clean off and when I did all of the gold came off everything but the grovers. Sorry for rant I was not happy with him. So I am going to polish the rest of the gold off the Epiphone humbuckers so they look chrome and install them in my ES-1G when I pull my finger out and start work on it again.
    That would aggravate me too Fuzzy.

    Just a suggestion, I put Tonerider Pure Vintage in my ST-1. best decision I've ever made. They have a fantastic tone.
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

  8. Liked by: darthdamo

  9. #28
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    RTS....Ready To Spray....just waiting on that weather....

    Click image for larger version. 

Name:	IMG_7262.JPG 
Views:	178 
Size:	111.3 KB 
ID:	12636
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

  10. #29
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    damn hate that Andy being ready and the weather isn't. Sure you can start work on the neck maybe or another build
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  11. #30
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    Yhep Wokks, bought all my builds up to speed this weekend....and that speed is s l o w
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

Page 3 of 11 FirstFirst 1 2 3 4 5 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •