yeah that HS shape is cool Alkay, that headstock is more like a PRS headstock is tapered toward the top but should work on your LP shape.
Have a good think about it as once the timber is cut there is rarely an undo button ! haha
yeah that HS shape is cool Alkay, that headstock is more like a PRS headstock is tapered toward the top but should work on your LP shape.
Have a good think about it as once the timber is cut there is rarely an undo button ! haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hahaha yeah I know. I'll pick three of my favourites and decide on which...it's a bit hard to put it all back together if I'm not happy with it haha.Originally Posted by wokkaboy
I think I'll sand the sides top and front of the headstock with 320 or 400 grit because they need work. The rest of the neck I'm really happy with.
Or maybe wet and dry with 1200 so there is less damage? I know what cedar colour ratio I used so I should be able to match it once I am through the TO and back to bare wood.
What do you think?
Last edited by Alkay; 29-06-2016 at 04:35 PM.
Reply With Quote
