Page 7 of 29 FirstFirst ... 5 6 7 8 9 17 ... LastLast
Results 61 to 70 of 281

Thread: ST-1 By nitroburner1000

  1. #61
    Mentor nitroburner1000's Avatar
    Join Date
    Jun 2016
    Location
    Mount Gambier Australia
    Posts
    1,171
    Quote Originally Posted by wokkaboy View Post
    Hey Nitro the tru oil dries pretty hard. You can always apply about 5 coats and then maybe scuff sand it to remove a bit of gloss if you are after a satin look. Main thing is give each coat at least 3 days curing. Where do you live ? being winter curing times are much longer.

    10 and 15 lt/100km is pretty good. A lumpy cam will blow out that figure much higher
    Ok, that sounds exactly what im looking for, so tru oil it is. I live in Mount Gambier, south east of south australia, temps around 12-15 during the day at the mo, 2-8 overnight. So do i order it from this site? How far does it go? 100 ml, 250 ml?

  2. #62
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hi Nitro, if you are only doing the neck then a 3 ounce (90ml) bottle will be heaps, order from the PBG shop

    http://www.pitbullguitars.com/tru-oil/

    if you get the 240ml bottle there's a chance it will go off before you finish it off, especially in the hotter months
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #63
    Mentor nitroburner1000's Avatar
    Join Date
    Jun 2016
    Location
    Mount Gambier Australia
    Posts
    1,171
    Quote Originally Posted by wokkaboy View Post
    Hi Nitro, if you are only doing the neck then a 3 ounce (90ml) bottle will be heaps, order from the PBG shop

    http://www.pitbullguitars.com/tru-oil/

    if you get the 240ml bottle there's a chance it will go off before you finish it off, especially in the hotter months
    Ok, thanks heaps for your help.

  4. #64
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    no worries Nitro, that's what the forum is here to help !

    Best apply more thin coats of TO plus it will cure quicker and hopefully you will have less wet sanding at the end as it should be flatter
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #65
    Mentor nitroburner1000's Avatar
    Join Date
    Jun 2016
    Location
    Mount Gambier Australia
    Posts
    1,171
    Quote Originally Posted by wokkaboy View Post
    no worries Nitro, that's what the forum is here to help !

    Best apply more thin coats of TO plus it will cure quicker and hopefully you will have less wet sanding at the end as it should be flatter
    That sounds like good advice. Just followed the link, it said free shipping anywhere in aussie then proceeded to charge me 8 bucks for shipping. Go figure...

  6. #66
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hey Nitro, don't proceed with the sale, think there's a minimum charge of $24.95 for free shipping, the TO is $19.95 so order something small like copper shielding or maybe a pot or jack to take it above $25
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #67
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by wokkaboy View Post
    bwhahah classic Franken, what do you drive a 5 litre FPV Falcon ?
    Yeah 335 S/charged GT, 6Spd Manual. Can be a pain in Sydney traffic but I also do a lot of country driving so it gets a good blowout once or twice a month. @nitro, for what its worth I only flicked my traction control off the once, buried my foot and remembered that I am neither Juha Kankonnen, Ken Block or the Stig. Thankfully no harm done and the traction control button gets left alone now.
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  8. #68
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by wokkaboy View Post
    Hey Nitro, don't proceed with the sale, think there's a minimum charge of $24.95 for free shipping, the TO is $19.95 so order something small like copper shielding or maybe a pot or jack to take it above $25
    The TO also serves as your entry pass to the Naughty Warehouse. Welcome, there may be room in the back someplace. Wokka will pour you a beer.

    I'm really intrigued to see how the coloured neck turns out under the TO. I was considering doing something similar to the FrankenWashie but the Maple in the neck came up so smooth and clean that I just couldn't do it. It's an idea that I might apply to the SV-1 that I have yet to start on though, will watch with interest.

    @DB, I pledge that I will not, and have never used TO and if I was present when it was used I did not inhale.
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  9. #69
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote Originally Posted by FrankenWashie View Post
    Yeah 335 S/charged GT, 6Spd Manual. Can be a pain in Sydney traffic but I also do a lot of country driving so it gets a good blowout once or twice a month. @nitro, for what its worth I only flicked my traction control off the once, buried my foot and remembered that I am neither Juha Kankonnen, Ken Block or the Stig. Thankfully no harm done and the traction control button gets left alone now.
    sounds good Franken.
    @ Nitro sorry your build diary turned into a petrolhead jacking haha
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #70
    Mentor nitroburner1000's Avatar
    Join Date
    Jun 2016
    Location
    Mount Gambier Australia
    Posts
    1,171
    Quote Originally Posted by wokkaboy View Post
    Hey Nitro, don't proceed with the sale, think there's a minimum charge of $24.95 for free shipping, the TO is $19.95 so order something small like copper shielding or maybe a pot or jack to take it above $25
    Ok one reply at a time..... I should be banned from the site permanently, the naughty shed would be too good for me.....Cos i didnt want to pay freight i went searching through town for another but similar product...Gasp....What happens to guys that do this and dont use the big TO?

Page 7 of 29 FirstFirst ... 5 6 7 8 9 17 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •