Hey Nitro the tru oil dries pretty hard. You can always apply about 5 coats and then maybe scuff sand it to remove a bit of gloss if you are after a satin look. Main thing is give each coat at least 3 days curing. Where do you live ? being winter curing times are much longer.
10 and 15 lt/100km is pretty good. A lumpy cam will blow out that figure much higher
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote