I think that often pick ups suffer from what I call Harley Syndrome, where 75% of the price is for the name.
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Remember that the reason Gold Foils fell out of favour is that they were notoriously noisy and microphonic. I know guys like Jason Lollar seem to have fixed this now, but who knows what sort of construction the GFS ones have. They are the guys who put ST style pickups in a P90 case and didn't tell anyone that is what they were getting. (Dream 90s)
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
After grain filling and sanding, applied colortone cherry red this time at full strength, pretty happy with the colour on the back (in the photo it looks brownish but it is more red in the flesh) ...some funky grain happening on the front left side will need to be resanded and restained.
Pickups finally arrived from Guitar Fetish GFS single coil humbucker sized goldfoils.
Without hearing them, have to say happy with the pickups as far as build quality is concerned. The pickups are wax potted with shielded wire. They are quite heavy but haven't pulled them apart to see how their made. Hopefully they sound as good as they look!
I was considering using an Ex trem as I couldn't find a Hagstrom style tailpiece, plus all the sold ones, had sold for over $200 then remembered that Hagstrom supplied Guild their tailpieces in the 60's thought I might have better luck finding a Guild tailpiece for a reasonable price. AS it happens Guild is now supplying new tailpieces, so will get one of them and put something over the G logo at the base of the tailpiece. see photo.