I'm thinking basswood perhaps?Originally Posted by Fretworn
Verstuurd vanaf mijn D6603 met Tapatalk
I'm thinking basswood perhaps?
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
hey Joe (what are you doing with that gun in your hand -> Hendrix haha) it could be basswood. The grain looks a bit more plain since you sanded it to 600 grit
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Lol
It's smooth as hell though, going to get busy with staining starting this weekend hopefully i can start ordering parts too if my paycheck is on time.
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
no worries Joe, 600 grit was pretty keen, hope the stain takes ok as over 400 grit paper polishes the timber surface and there won't be many pores to 'take' the stain. I'd try staining the area under the pickguard to see how the stain goes. If it doesn't take you may need to sand back to 360/400 grit
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
My OCD would like me to point out that the line is "Hey Joe,where you going with that gun in your hand?". now if you'll excuse me I need to go and sort my paper clips by wire gauge, size and colour, arrange my pencils in perfect parallel alignment and insure the edge of my eraser is perfectly square.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha no worries Franken thanks for correcting me mate, I've heard the song so many times and I still got it wrong haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Mate, you're welcome but I think its actually a form of Psychosis on my part, there's a wrong coloured tile in the verandah at my house and I simply can't look at it or else I start reaching for the tiling tools.....
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha maybe Franken can you put a pot plant over the wrong colour tile to hide it ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
But, but....I'll know its there.....mocking me with its incorrect hue....
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha Franken sounds like that tile is bothering you enough to remove and replace with the correct colour !
@ Joe, "Hey Joe, where are you going with that thread jacker in your hand"
sorry about the thread jack Joe !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote