really nice job, this is a great build
really nice job, this is a great build
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
this is an epic build Grant, well done
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
If you've got some left over veneer that will match the switch area, I'd try that first. Cut it so it just fits into the switch hole, drill for the switch, then finish it the same as the top (with maybe some CA glue on its edge and underside to toughen it up). Put some copper tape on its underside to shield it and use it like a big washer on the switch. Then you can have either a clear plastic ring 'switch cover' or a full clear pickguard with the switch holding the veneer ring in place. You'll probably still have a small gap around it, but I think it would look better that a solid cover.
Scott.
I think I might cry when I finally see this guitar finished. It's looking so pretty right now.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Thanks for the replies guys.
You've all given me a bit to think about for the switch surround. Had it in my head to use a pickguard of some sort and didn't really plan ahead for anything else. I do have some left over veneer to play around with, just need to decide on a small surround or stick with the full guard, which when you think about it, with the raised centre section on the body, is really an oversized switch surround on this model.
Fretty, that will be two builds in a row
Installed the tuners, Grover upgrade in nickel black. Placed a graphite nut on there to trim the veneer edge, the bone nut I have for it is hiding on me. Made a trc to mimic the HS shape.
Grant
nice one Grant, that headstock is looking unreal
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Man this looks like custom build on a luthiers website. Headstock looks a great design and love the way the logo is done
Tony
For the switch surround I'd go with a piece of veneer with a slightly larger bit of black pickguard under it so it kinda frames the veneer, it would also echo the effect on the headstock. Just my 2 bobs worth
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
That headstock is awesome, just fantastic.
Scott.
Looks great Grant, Firebirds would have to be one of my favorite guitars and this build is awesome. I actually like the look of the graphite nut with your grovers and your trc.
Trc looks great with a 3 layer headstock effect
Posting Permissions
Reply With Quote
