I have had similar thing happen from either applying too much or over working the application..
Let it cure for a few days then give it a swipe with 320 grit to open it up and give it some tooth.
I only rub in one direction and brush the sandings off after each wipe, this helps to stop the paper glagging up.
I also give the finish a light sand between each coat, this helps to level off any high spots and stray cat hairs...
The pic is after 4 coats of the new Ocean Mucus colour, left for two weeks to cure then cut and polished..
It is still a bit soft, so after I leave it alone for about three weeks it should be nice and hard and ready for the final buff up
Reply With Quote
