good stuff Doc, maybe you can call the track "I got a bargain Ibanez from Cashies blues" haha
good stuff Doc, maybe you can call the track "I got a bargain Ibanez from Cashies blues" haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
ahha no worries Ponch, well surely the Highway Patrol can afford to pay to get a shop to do the work !
They can also give you a replacement bike while you wait for the work to be done, how about the latest Fireblade or Hayabusa ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Haha....good one Wokka, I just finished doing the recording, going to be posting a link to it shortly.
Okay, here it is....enjoy!!:
https://dl.dropboxusercontent.com/u/...2/RG350DXZ.mp3
The first part of the demo is me just going through all the pickup selections just so you can hear what they sound like with a clean-ish tone, because the pickups are high-output types it's not exactly pristine clean, the second part is me playing a riff with the bridge pickup and a high-gain distortion tone, and then the third part is me doing a solo with the neck pickup.
During the clean part, I start with the neck pickup setting and then work my way towards the bridge pickup setting.
Last edited by DrNomis_44; 12-05-2016 at 11:37 AM.
well it won't be a blues song as blues songs are generally about negative things in life haha
so when shall we send out the Doc search party tomoz in case you got lost ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Well, knowing my great talent for getting myself lost, send out the search party the minute you don't hear from me....lol....just kidding, I'll be making sure I take my laptop with me when I go round to my mate's place, he has internet there so it should be all good Wokka.
Update:
Not sure if any of you guys have checked out the demo clip I made of my RG350DXZ guitar, but I'll see if I can do a better sounding demo this week, just need to sort out getting my DAW PC back online though, which I'll hopefully be doing tomorrow, might see if I can use my Radial Tonebone Hot British pedal since it gives a better overdrive tone than the plugins I used in that first demo.
Hey Doc I didn't realise there was a demo, you must have edited it and added it - just checked it out, the axe has a good clean and crunch sound, is the lead at the end of the demo on neck pup ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep that's correct, I used the neck pup for the lead, it definitely has a bit of the Strat vibe to it, the neck pup is an Infinity 4.
I reckon it has a good clean sound too, the crunch tones are good too, sort of 80's hard rock like ala Joe Satriani on his early albums, I've been ummm-ing and ahhhh-ing about whether I should change them out, was thinking of changing them out for a set of Evolutions at one stage.
Last edited by DrNomis_44; 23-05-2016 at 10:37 AM.