OK. Fretboard levelled with a 12inch radius block. A nice colour has appeared in the rosewood. The fretboard radius also looks better looking from end to end. Then ensuring fretboard was flat I applied 3x coats of CA glue. Applied using blue nitrile glove & finger. Goes on smoothly and quickly. After this has cured I'll sand out flat and do a few more coats of glue / wetsand smooth. Then onto cutting the headstock and finishing the rest of the neck. Getting the fretboard done was essential in carrying on with this build and it looks like I'm almost there with it which is good.
Sent from my SM-T700 using Tapatalk
Reply With Quote