oh well Doc, your build diary is still the longest thread on the whole forum, think the ugly thread got to around 60 pages
oh well Doc, your build diary is still the longest thread on the whole forum, think the ugly thread got to around 60 pages
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Originally Posted by wokkaboy
I reckon I could still get some more mileage out of my STA-1M thread mate, I'm working on fixing my muck-up with the Floyd install on my strat, will post some more updates and pics once I get all I need together and organized.
I managed to buy some 12mm Oak doweling from the big green shed on Tuesday, so I could plug the holes i drilled in the strat body, problem is the dowel is a bit too big for the hole, I could have bought some 10mm dowel, but they had none in stock, so, either I have to sand the dowel down to size, or, I drill the holes to fit.
For the time being I'm leaving the Strat body alone till I can come back to it with a fresh mind.
Last edited by DrNomis_44; 11-05-2016 at 02:35 PM.
Doc best find 10mm dowel if that is closer to the hole size. Don't risk drilling the hole any bigger.
make sure you get a selfy out the front of the Big Green Shed just for DB hahha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hahahaha....yep, so he can pronounce me "Guilty as Charged", I'm really not too worried about it, since I'm prepared to take my punishment as a mature adult...lol.
Besides, I can have a good yarn with all my mates in the naughty warehouse, now what's so bad about that?
I might see if I can record a demo of my RG350DXZ a bit later on for you guys.
Last edited by DrNomis_44; 11-05-2016 at 02:51 PM.
well scored Doc!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Nice one Doc. Always worth swinging by $ converters for bargains.
Sent from my SM-T700 using Tapatalk
Current Projects
#Planning 5 String Bass
Nice score. My local cashies is awful for guitar stuff. It's all either way overpriced or absolute rubbish and moderately overpriced.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
i agree Pablo its the same here everything in the nearby cash converters seems to be full retail or more. Nice buy Doc good luck with the guitar. let me know what graphics card you going to stick in the Mackintosh Doc.
Best wishes
Kimball
Yep, I've decided I'm going to go with the ATI Radeon HD 4870 512Mb Graphics card for my Hackintosh build, since I've had a real pain of a time getting it to work in Windows 10 on my DAW PC, I'll need to wait till I get a PSU that Dedman's sending in the post to me first though.
Oh and cheers mate.
They are always prepared to negotiate....but I do hate feeling that they are attempting to rip me off when they price at close to or even HIGHER than retail.....
Gavmeister
Posting Permissions
Reply With Quote