Putting too much DT Finish on
Meet what happens when greed and inexperience have a baby.
Yup too much DT final coat.
It was difficult to sand back as you inevitably take off some stain. I sanded back with 600 grit then 1200 grit.
Its heartbreaking, frustrating and saddening. buuuuut the punishment kinda fits the crime.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Been there, done that too.Originally Posted by Andy40
Putting too much DT Finish on
Meet what happens when greed and inexperience have a baby.
Yup too much DT final coat.
It was difficult to sand back as you inevitably take off some stain. I sanded back with 600 grit then 1200 grit.
Its heartbreaking, frustrating and saddening. buuuuut the punishment kinda fits the crime.
All too often it is heading in the right direction then disaster strikes and wonder whether you are you still a DT Disciple given this latest set back?
Posting Permissions
Reply With Quote