Good idea. I have used an old Strat scratch plate as a donor for making washers to take up slack behind output jack plate socket holes as they are about 2-3 mm thick which seems just about right thickness most times.
Good idea. I have used an old Strat scratch plate as a donor for making washers to take up slack behind output jack plate socket holes as they are about 2-3 mm thick which seems just about right thickness most times.
Thz man, soldering is a goOriginally Posted by wazkelly
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Looks like you have got your hands full there.
Signing off and going to bed as it is late over here and will check in on your progress tomorrow night.
Posting Permissions
Reply With Quote
