nice one Wazz, you are getting bit of a collection of builds buddy, there's no doubt you have been sucked in by GAS !
has the tele been built with stock hardware ?
what is your public holiday in Qld for ? Anzac Day was only a week ago !
nice one Wazz, you are getting bit of a collection of builds buddy, there's no doubt you have been sucked in by GAS !
has the tele been built with stock hardware ?
what is your public holiday in Qld for ? Anzac Day was only a week ago !
Last edited by wokkaboy; 02-05-2016 at 07:29 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks Woks.....only 4 builds were on the go and might ease up for a bit once these are finished before contemplating any more.Originally Posted by wokkaboy
Upgrades are Wilkinson PUP's, also have some Bourns 250k audio taper pots, Sprague 0.047 Orange Drop Capacitor, Recessed Jack Plate with Switchcraft jack, plus 4 way switch so that I can wire it up in series on the 4th setting. Ah, also the custom home made Faker Wazzacaster transfer decals too.
Our State Labor Government moved Labour Day back from 1st Monday in October to satisfy their socialist roots as god knows we really need another day off just one week after Anzac Day. They have instead dropped June as Queens Birthday and we will celebrate that in October? Makes a lot of sense considering Lizzie's Birthday was on 21st April.
Apologies if I have offended any Labor Party supporters, just reporting things how I see it.
Its a bit crazy isn't it....I just can't keep up. Oh well when you work for yourself there ain't no public holidays.....
Love the flame top and colour scheme on that tele Wazz. The neck seems to have taken the stain as well as the body.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thanks Andy.
Not easy getting stain to match on rock maple necks as the grain is so tight. The trick seems to be a very light 180 or 240 to take the very slightest roughness off and apply stain. If you go any further it gets too smooth and glassy and thus repels colour.
Posting Permissions
Reply With Quote