I would tend to listen to Tony.
Having said that I have done it, but the surrounds I made were rather large and the mags were about 30mm away and I did shield it.
I would tend to listen to Tony.
Having said that I have done it, but the surrounds I made were rather large and the mags were about 30mm away and I did shield it.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Mine is "Aqua-burst" or something like that. They are fun guitars to play. I'm really fond of mine.Originally Posted by tonyw
Hey thats my 56U2 but i have a different colour
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
But you never know unless you experiment, moving the poles facing and away from each other, strength of magnets, the rare earths being really strong, you may create something unique, and you will never know unless you try it.
Mine is copper burst
Last edited by tonyw; 20-04-2016 at 06:42 AM.
track sounds great Tony, is that you singing as well ?
cruisy track
so are you back from your camping trip ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah mate thats all me except for drums.
Last edited by tonyw; 20-04-2016 at 06:41 AM.
I'm sure I mentioned this here before, but the best "acoustic guitar" sound I've ever recorded was a Rode condenser in front of the Dano.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Rodes are great on Acoustics and some vocals. What rode do you have Fretworn. I have and use the Rode Nt1-a which I had modded by a guy called Mike Joley.
Last edited by kimball492; 20-04-2016 at 06:34 AM.
I wish it was mine, it belongs to a mate. It is a large diaphragm condenser but I don't know which type.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Hey Fretworn you know you could buy an Mxl 910 microphone http://www.ebay.com/itm/MXL-910-Voic...rmFUE2b7RkmaFw then mod it yourself with this kit http://microphone-parts.com/collecti...mp-v57-pcb-kit it sound better than the rode by far. Then at later date you can change the capsule. You'll have a mic that sounds better and would be at home in any studio in the world.
Posting Permissions
Reply With Quote
