Next up I started blending the fade with a solution diluted halfway between the first two.
After a bit of work with sandpaper to even it all out more I hit it with some sealer.
And started building the clear coat.
Next up I started blending the fade with a solution diluted halfway between the first two.
After a bit of work with sandpaper to even it all out more I hit it with some sealer.
And started building the clear coat.
Once that was all done it was time to attach the neck. This is a set neck so I glued it up got it in place and clamped 'er down.
After about 12 hours I threw some electricals at it and then left it another 12 hours before I strung it up.
And she was all done.
Anyway cheers for reading, have a good one.
Mulldoe.
Last edited by Mulldoe; 17-04-2016 at 10:39 AM.
Posting Permissions
Reply With Quote