First Build ES-3 Birthday Guitar

[Taswegian]

Getting a bit ahead of myself but I would welcome opinions. The holes for the volume and tone controls have been made in a sort of "Southern Cross" pattern (first photo.) I could fill and re-drill for the neck volume and keep the repair concealed under the knob (second photo.) To get a more accurate ES-175 pattern (3rd photo) would require repairs beyond my capabilities especially as I am considering a natural finish. EDIT: added a photo of an original 175. I suspect that the hole cutting template was applied about 90deg out of whack on mine.

[enikoy]

Getting a bit ahead of myself but I would welcome opinions. The holes for the volume and tone controls have been made in a sort of "Southern Cross" pattern (first photo.) I could fill and re-drill for the neck volume and keep the repair concealed under the knob (second photo.) To get a more accurate ES-175 pattern (3rd photo) would require repairs beyond my capabilities especially as I am considering a natural finish.

Your, lucky one of my was way too close to the binding.