hey Johnny the scroll saw will be fine to cut the pickguard to size
I actually use a bandsaw with care to cut the pickguard or a scroll saw !
hey Johnny the scroll saw will be fine to cut the pickguard to size
I actually use a bandsaw with care to cut the pickguard or a scroll saw !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I got an idea from a guitar builder... he uses thin Wood or veneer to make a plate like the one I have in plastic. That should be easier to cut than plastic and probably look better.Originally Posted by wokkaboy
Decided to paint the back and edges of the guitar glossy black.... so I put so far 4 layers of primer on the back of the guitar!
Next step... sanding and sanding... and probably more primer... and then get ready to the glossy black!
Posting Permissions
Reply With Quote