haha good one Ponch, any excuse to lay the boots into the Pies haha
for once the thread for my pickups is being thread jacked - about time it happens to me!
haha good one Ponch, any excuse to lay the boots into the Pies haha
for once the thread for my pickups is being thread jacked - about time it happens to me!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Nobody is ever free from the thread jack!
haha good one Pest, I know that. We are only about 61 pages short of Doc's build diary hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Just a casual 61....
So today after being the master plumber of the house, and saving myself 4 hours paying a plumber, i decided i might do a bit of magnet charging. I had a couple of strats to do and Woks tele.
Heres how simple it is:
I put 2 Strong Rare Earth Magnets attracting each other in the vise, i mark which side is face out, South and North and mark them.
Run the pickup slowly through the magnets, the pull is strong, this is the reading after 2 passes, i do 4. To get a south side facing pickup like this, the bottom of the pickup goes to the South Magnet, the Top to the North side
Reading south Facing
You reverse the pickup to get a North facing neck pickup for RWRP, top facing south bottom facing North
Your actually doing the opposite of what you want the magnet polarity to be.
Last edited by tonyw; 08-04-2016 at 05:30 PM.