LP-1S "Poison Ivy"

[dingobass]

The poo oil might change the colour, as the stuff is a baby poo yellow....
Might pay to look at a polyurethane clear rattle can spray (if you dont have spray gear)
I would avoid using acrylic clear, it can look great for a while then do some funky things such as shrink and crack, go a bit milky or uneven.
Jarrod, who did our spray paint tute vids used to use acrylic but now avoids it because of some of these reasons.

[Joe Piler]

The poo oil might change the colour, as the stuff is a baby poo yellow....
Might pay to look at a polyurethane clear rattle can spray (if you dont have spray gear)
I would avoid using acrylic clear, it can look great for a while then do some funky things such as shrink and crack, go a bit milky or uneven.
Jarrod, who did our spray paint tute vids used to use acrylic but now avoids it because of some of these reasons.

Too bad dingotone can't be shipped overseas is this for technical reasons or because most customs dont allow it?

Verstuurd vanaf mijn D6603 met Tapatalk

[dingobass]

Too bad dingotone can't be shipped overseas is this for technical reasons or because most customs dont allow it?

Verstuurd vanaf mijn D6603 met Tapatalk

We are working on export... hopefully mid year should see all t's crossed and i's dotted... A lot of paperwork...

[Joe Piler]

We are working on export... hopefully mid year should see all t's crossed and i's dotted... A lot of paperwork...

Sweet, got an idea floating around in my head for a see thru red tele. Might try it out if its possible by then.

Verstuurd vanaf mijn D6603 met Tapatalk

[wazkelly]

Hi Joe, the inks I mentioned before worked out fine under TO.

DB is right though in that it has a light amber colour and can turn blues a slight tinge of green as you can see in this shot. I have also attached one of a maple neck headstock to show the natural colour shade inherent in TO.

[Joe Piler]

Hi Joe, the inks I mentioned before worked out fine under TO.

DB is right though in that it has a light amber colour and can turn blues a slight tinge of green as you can see in this shot. I have also attached one of a maple neck headstock to show the natural colour shade inherent in TO.

For some reason when I applied the tru oil over the stamp ink (got that idea from youtube) I was using it turned to poo, the acrylic however holds its color very well when TO is applied. Also the markers im using to draw the poison ivy figure would "bleed" into the grain making the edges quite blurry. This problem has also been eliminated with the acrylic paint.

Verstuurd vanaf mijn D6603 met Tapatalk

[wazkelly]

For your poison ivy figure it may work better applied on top of your first clear top coat to stop it bleeding into the stain coat. This is how transfer paper type decals are added.

If the TO caused things to turn to poo maybe the stain was not fully dry perhaps? I usually do all the experimenting on a scrap bit of pine ply and have sometimes also applied 1st coat of TO with a 1" wide paint brush as using a rag straight up can cause things to go pear shaped.

[Joe Piler]

For some reason when I applied the tru oil over the stamp ink (got that idea from youtube) I was using it turned to poo, the acrylic however holds its color very well when TO is applied. Also the markers im using to draw the poison ivy figure would "bleed" into the grain making the edges quite blurry. This problem has also been eliminated with the acrylic paint.

Verstuurd vanaf mijn D6603 met Tapatalk

Makes sense i'll definitely test that

Verstuurd vanaf mijn D6603 met Tapatalk