looks great Stephen, so will the sides be natural ?
Have you stepped down the headstock where the blue stain is ?
I bought the same pack of outdoor light globes on the weekend !!
looks great Stephen, so will the sides be natural ?
Have you stepped down the headstock where the blue stain is ?
I bought the same pack of outdoor light globes on the weekend !!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hey Woks, was that from DB's favourite store? You know the one, the BGSFOS? If so you'll never get paroled from the naughty warehouse.Originally Posted by wokkaboy
Nice lookin guitar Stephen. Never seen one before, looks cool and should sound great with those P90's.
Finally finished. Made some changes even added a personal touch from Macau Casino. Anyway, wired it up with the help of a friend. Heaps of noise and the bridge, P90, nothing. So back to the drawing board I guess. Wired it up as per diagram but the p90 has nothing and overall the output is very low but that is insignificant compared to the general noise. I'd ask for any advice on what may be the likely issue but I guess you will all say, recheck all the wiring
Was thinking whether or not to line the cavities with foil....
Looking great Stephen. I always liked the idea of these guitars, but the pot placement is all wrong. If they had been behind the switch I reckon I would have bought one of these for my first kit. Love what you've done with it though. great colour and the poker chip is a cool addition.Finally finished. Made some changes even added a personal touch from Macau Casino. Anyway, wired it up with the help of a friend. Heaps of noise and the bridge, P90, nothing. So back to the drawing board I guess. Wired it up as per diagram but the p90 has nothing and overall the output is very low but that is insignificant compared to the general noise. I'd ask for any advice on what may be the likely issue but I guess you will all say, recheck all the wiring
Was thinking whether or not to line the cavities with foil....
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Thanks, I was concerned too, once I built it and played it a l;ittle last night (despite the noise) they didn't get in the way. But I do agree, if they were set further back that would have been perfect.
Posting Permissions
Reply With Quote