Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 35

Thread: LP-1M Second Build

  1. 29-03-2016, 11:07 AM #1
    Bluesmartyboy
    Bluesmartyboy is offline
    Member
    Join Date
    Feb 2016
    Posts
    51

    LP-1M Second Build

    Got my LP-1M kit today in the post....two minutes later the door bell goes again and the Alnico IV vintage Gold Humbuckers have arrived.....so its all go go go.

    Opened the kit and a looks good......and then......whats this Bolt On neck !!! check order form.....Yep ordered a glue in....

    So Question......Preference....Bolt on or Glue in......your opinions.....especially sustain....etc....

    will post some pictures.....

    plus need to add some photos of the latest stage of Ben's (my 13 year old) SG build......
    Reply With Quote Reply With Quote
  2. 29-03-2016, 11:13 AM #2
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    hey Bluesy, depends if you want to wait for the kit to be returned for a set neck kit.
    I think bolt on kit will sound about the same as a set neck kit and you have the option of removing the neck if you ever have to re-finish the guitar
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  3. 29-03-2016, 01:26 PM #3
    Bluesmartyboy
    Bluesmartyboy is offline
    Member
    Join Date
    Feb 2016
    Posts
    51
    Have done a quick mock build and like the action so will probably have to get some screws and a back plate as they are missing from the kit.....

    1 question i have is the intonation.....i measured nut to 12th and got 313mm and yet 12th to bridge saddles was about 318 mm (See attached picture)...do you reckon i will be okay with this length given the string compensation required ????

    First thoughts on the build are to keep the back and sides natural just oiled as the grain is fantastic....and a deep blue oiled top......
    Already got a list of needs....

    Graphite Nut.
    upgrade the Rhythm / Treble backing plate.....looks a tad nasty.
    Upgrade three way switch......Feels awful and slack.....plus too much lateral movement...
    Upgrade the Control Knobs.....Same reason....

    anyway photos including the mysterious bolt on neck......I guess number 141 is gonna feel the wrath of god.....Click image for larger version.  Name: IMG_3855.jpg  Views: 327  Size: 59.9 KB  ID: 9936Click image for larger version.  Name: IMG_3856.jpg  Views: 350  Size: 57.5 KB  ID: 9937
    Click image for larger version.  Name: IMG_3853.jpg  Views: 341  Size: 151.3 KB  ID: 9934Click image for larger version.  Name: IMG_3854.jpg  Views: 325  Size: 63.3 KB  ID: 9935
    Last edited by Bluesmartyboy; 29-03-2016 at 01:58 PM.
    Reply With Quote Reply With Quote
  4. 30-03-2016, 12:50 PM #4
    Bluesmartyboy
    Bluesmartyboy is offline
    Member
    Join Date
    Feb 2016
    Posts
    51
    So it turns out that i accidentally received a quilted maple LP not a flamed......Happy and thank you Adam for your help so far.....

    So got stuck into a little bit of light sanding and then thought....what the hell....time to try a nice golden teak stain with just a small drop of Jarrah thrown into the mix.....

    Pics to follow....
    Reply With Quote Reply With Quote
  5. 30-03-2016, 12:55 PM #5
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Good stuff Bluesy, with your intonation the saddles have some forward movement so think you should be ok for intonation.
    This kit has pre-drilled holes so must have come from the 'other' factory.
    Golden teak on the quilt with jarrah should look excellent, look forward to pics !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  6. 30-03-2016, 01:07 PM #6
    Bluesmartyboy
    Bluesmartyboy is offline
    Member
    Join Date
    Feb 2016
    Posts
    51
    Quote Originally Posted by wokkaboy View Post
    Good stuff Bluesy, with your intonation the saddles have some forward movement so think you should be ok for intonation.
    This kit has pre-drilled holes so must have come from the 'other' factory.
    Golden teak on the quilt with jarrah should look excellent, look forward to pics !
    Pics after following your advice WB.....fine sand with 320 grit....then 1 coat of F&W Golden Teak with a Splash of Jarrah for the top....and wow it sings to me.....Click image for larger version.  Name: IMG_3859.jpg  Views: 513  Size: 70.7 KB  ID: 9968Click image for larger version.  Name: IMG_3860.jpg  Views: 478  Size: 153.8 KB  ID: 9969Click image for larger version.  Name: IMG_3861.jpg  Views: 469  Size: 83.6 KB  ID: 9970
    Reply With Quote Reply With Quote
  7. Liked by: wazkelly
  8. 30-03-2016, 01:17 PM #7
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    wow that looks unreal Bluesy, wait till you get some TO over that will pop like mad !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  9. 30-03-2016, 03:17 PM #8
    Fuzzbeard
    Fuzzbeard is offline
    Member Fuzzbeard's Avatar
    Join Date
    Sep 2015
    Location
    Chinchilla, Qld
    Posts
    220
    Wow that looks great! you've gotta be happy with that.
    Reply With Quote Reply With Quote
  10. 30-03-2016, 03:31 PM #9
    tonyw
    tonyw is offline
    Banned
    Join Date
    Dec 2015
    Posts
    1,171
    Looks very very nice mate
    Reply With Quote Reply With Quote
  11. 30-03-2016, 06:32 PM #10
    wazkelly
    wazkelly is offline
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    That will come up awesome after plenty of top coats.
    Reply With Quote Reply With Quote
Page 1 of 4 1 2 3 ... LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules