Hi Ruben
yes a hanger is how most people leave the body/neck stain to cure. Don't apply the stain too heavily and there's no chance of runs.
Before you start have a look at the control cover you will need to recess it now before staining would be best.
Also fit the stereo jack and make sure you can get the nut to thread on. You may need to trim the inside of the jack hole a bit
Last edited by wokkaboy; 30-07-2015 at 04:17 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote