Quote Originally Posted by Pendragon View Post
Ok, bad news first still have the same issue bridge height, didn't take into account post height prior to fitting so I have a 9mm height at the base of the neck. Solution, have the original neck from the kit so I'm going to cut the heal end off and use it as a shim, funds have dried up for this build so I'm using what's on hand to fix this.
why don't you just get a 1 degree shim from ebay? Or 1.25 degree. They're like $5. Maybe a bit more. That should do it. You are using a TOM bridge on a tele. That'd never work in the first place. A Gibson designed piece of kit for angle-necked guitars on a Fender guitar that was designed with a straight neck. It's like dog mating with a turtle.