Results 1 to 10 of 15

Thread: Mk-2 First Build

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Hey Swartbaard Yes you have to wet them first and wet the location where you intend to set it.The trick is to spray a few coats of clear coat on the decal paper and let it set before you place it in the water,otherwise the inkjet ink will run as soon as you wet it.The clear coat also makes the decal firmer and easier to work with.The next step after the decals dry I'd to spray a few coats of clear coat let those dry and gently work it back with either 1000 and then1200 grit sand paper.Initially the decal lines that stick out like dogs balls but with a bit of light wet sanding blend into the Finish.Oh and I used Rust oluem x2 satin coat.
    Last edited by Troy murley; 04-07-2023 at 11:28 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •