Thanks again McCreed

Moved forward again on this today as the extra copper tape finally arrived.

Shielding added - there is copper tape running between cavities: Neck >> Control and Bridge >> control.
Click image for larger version.  Name: Shielding 2.jpg  Views: 746  Size: 178.2 KB  ID: 42852

I have layed out the wiring as below and would like to check please:

Q1. How do I get the bridge PUP wire to connect to both the braided to back of volume pot and the center to the 3 way switch lug - can it be added to the switch housing lug that is also earthed to the back of volue pot?

Click image for larger version.  Name: Wiring layout2.jpg  Views: 738  Size: 152.9 KB  ID: 42851

Q2. Have I allocated the braided jack earth wire to the correct jack lug?
Click image for larger version.  Name: Power wiring.jpg  Views: 753  Size: 129.8 KB  ID: 42850

Q3. When running the earth wire back to the bridge plate should it the exposed wire touch the copper foil?

Thanks in advance!

D