Need some wiring help on EX7 kit

[patrickparks1]

@robsmith,

As to how I decided on how to wire things up, I followed those 3 YouTube videos above right from Pitbull's own channel on how to wire up the EXA guitar from Pitbull.

So, I'm looking at the diagram that you linked to, and I think it matches exactly with how I am wired and the sketch I provided.

--Both of my pickups ground to the back of the volume pot, and the hot wires go to each end of the 3 way switch (check)
--one lug on the volume pot is bent back and grounded to the volume pot (check)
--one lug on the tone pot is going to one lug on the volume pot (check)
--a capacitor is on the middle lug of the tone pot and grounded to the back of the tone pot (check)
--the middle lug on the 3 way switch goes to the tone pot (on the same lug that the tone pot and vol pot are connected using (check)
--the 3 way switch ground is connected to the back of the volume pot (check)
--the hot wire on the tip (outside lug) goes to the center lug on the volume pot (check)
--The earth wire on the sleeve (inside lug) goes to ground on the top of the tone pot (check)

Edit: the only thing I can see that I left off my sketch was the ground wire to the bridge. I do have that it place. However, I have it grounding to the volume pot instead of the tone pot < I assume that is okay as ground is ground.

Keep the suggestions coming guys, I appreciate all the help (as always).


Pat