Quote Originally Posted by RocknRolf View Post
I'd love a compressor and airbrush, if only I had a shed... At this moment I have nowhere to put all the ideal gear, unfortunately, so have to stay with the strictly necessary gear for now. The airbrush would be a great addition to the finishing options with board building as well so who knows.

But thanks, and yes your finishes are lovely.
I'm not trying "pressure" you (get it? pressure? air compressor? never mind...) but if you don't require a big compressor to run air tools, you can get mini compressors just for airbrushing. You can get decent little unit that will run 23LPI with a nozzle pressure between 10-40 PSI which is heaps for a .5mm airbrush.

Before I got my mini touch-up gun I used a cheap airbrush kit for finish necks and worked great for that. I would have to do more coats (poly) than with the touch-up gun, but the results were good.
Also, with the airbrush set up, you really need a space any different to where you'd use spray cans. I'd be willing to say that there is actually less overspray with the airbrush.