I have seen a lot of positive posts about duplicolor. my experience was not so good. It is hot and humid here, and I think it may have been too much so when I applied mine. I used duplicolor's sanding filler, with their automotive paint over the top and their clear coat over the top of that. The paint did not stick well to the primer, and the whole thing feels a bit rubbery years after the build. The experience was bad enough that I have not used it again...and am at the point where I want to take the finish off and try again.
Looking for advice. I will take it to bare wood if I have to, but I plan to finish with a solid color, so if I can get away with sanding flat, I'll do that. This is an ES style guitar, so I can't take the orbital sander to it as I would like to.
Reply With Quote