Quote Originally Posted by JimC View Post
Have you got a little multimeter that does resistance? Superficially it looks as if the right connections are there, so I'd check continuity. Earths especially. A bit more detail on the symptoms would be good too.
Thanks for the note. Before I install the bridge and string up the guitar, I check to see if the wiring is correct by plugging in the guitar and just lightly tapping the pick ups to make sure I can hear it through the amp.

For the individual tests of each pick up, as I turned the volume pot up to max, I could hear the tapping clearly through the amp. However, when I completed the full wiring per the diagram, and tried the tapping test, even with adjusting each volume pot to max, I could not hear any tapping coming through the amp.

As I adjust the tone pot, I can hear the change in frequency so I know that, that pot is working. I have tested the pick ups and each pot with a multi meter and the appropriate resistance amount is shown on the meter.

Hope this makes sense.