Hey folks, hope you're all staying safe in these interesting times!
I'm working on a PRS-1H semi-hollowbody and I'm about to get started on soldering. It has 2 humbuckers + 2 tone pots + 2 volume pots and a 3 way switch with the kit. I've been examining Pitbulls own wiring diagram for this configuration (I understand this is a generic diagram but thought it would apply here)
My issue is that the pots are prewired together, which I'm assuming is to make life easier but now I'm just more confused.
I've uploaded a bunch of pictures so you can see what I'm seeing, let me know if you need anything clarified. https://imgur.com/a/g5slwij
Each tone pot is soldered to a volume pot (yellow + red), then the wires from each volume pot are soldered together with an additional black wire, I'm pretty sure this black wire is to be connected to the output jack.
All of the ground wires from each are soldered together here too, should these 3 grounds be soldered to the ground of the 3 way switch?
Where should the live + ground wires of the pickups be soldered to? The back of their respective volume pots? (bridge/neck).
Do I also need an additional wire to ground the output jack + bridge volume pot, as suggested in the diagram?
Reply With Quote
