Quote Originally Posted by Simon Barden View Post
They look OK, and I think I've heard good things about those companies wiring harnesses before (athough I have no direct experience).

BUT, you have a "The SG", not an SG Standard (or an SG based on that). The "The SG" has a barrel jack, not a standard chassis jack socket, and the selector switch in a different place compared to an SG Standard, so neither of those two pre-built harnesses will fit. It is a DIY job, I'm afraid. Or find someone better at electronics and soldering than you are to do it.

Because the barrel jack needs to be fitted from outside the body, you won't ever get a complete pre-built wiring harness for your guitar, as the jack will always have to be wired up after it's installed in the body. Switchcraft still make the same barrel jack.
Good news. I contacted 920D and they'll build a custom wiring harness for me. They're running a holiday sale now so the price is very reasonable: parts, labor and shipping is a bit over 100 USD. It'll be a couple of months before I see it. I'll post photos once I do.