Quote Originally Posted by wcieslik View Post
Although I have not fitted it yet. I can see mine will benefit from a string retainer to hold the D and the G down firmly in the nut slots.
I kinda made a bad decision going with a moslike roller bridge. It raised the string height considerably vs using the stock TOM.
Been quite happy with my last fret level and general neck relief attempt.
Am going to try a shim at the deep end of the pocket to raise the neck angle to be greater than the bridge height at it's lowest. It's got heaps of adjustment up if I need it.

Sent from my D6653 using Tapatalk
Agree with your string retainer idea. They sit quite high

What kind will you use? I’ve no idea where to start.


Sent from my iPhone using Tapatalk