Tonerider Split Coil wiring gremlin

[wazkelly]

Are you testing it still wired to the push/pull? If possible, test the switching on the spare pole of the push/pull to see if it has maybe failed locked in the 'up' position.

Hi Scott, i have removed all wires from the switch and tested across them in isolation. That way thought i could narrow down where the problem might be?
Got a spare new switch and can run some tests on it and compare to existing one. Just in the middle of another soldering job and should be done in about 10 mins.

Sent from my SM-A520F using Tapatalk