Thanks wokkaboy,

Yes as I stated before, I do have that wiring diagram, but what I have been supplied is 2 pots with the green capacitor and 2 without, so I'm assuming they have supplied 2 tone and 2 volume pots. The problem is this doesn't match the wiring diagram.

Also what is confusing with the wiring diagram is the separation of the white and red wires on the bridge humbucker pick up. It clearly shows the Green, white and bare wires going to ground on the Front coil Vol (250K) pot, black wire going to the centre terminal on the same pot, and red wire going to the centre terminal on the Rear coil Vol (250K) pot. I now believe based on the info above that the red and white wires should remain paired together.

I am really confused and certainly not happy with the results to date.

Hope you can help.