Results 1 to 10 of 146

Thread: Barnseys ES1TL

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-03-2017, 04:15 PM #11
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hey Adam, looks good. Your measurements are they from the crown of the 12th fret to the saddles and are the saddles wound all the way forward ? a G type scale is 24.75" = 628mm so 12th fret to high E saddle should be about half that ->314mm. The low E string will need to be further back to make up for the string thickness so it will end up being about 317-318mm, will the low E string saddle move that far back ?
    Also just double check front side of nut (FB site) to 12th fret crown is about 313/314mm
    Last edited by wokkaboy; 16-03-2017 at 04:18 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules