Hi Doc, read my above post I added some tips. Yes use the White Knight clear gloss was about $15/can from memory.
Also get some white knight primer and you will need to sand off most of the existing stain and go through the timbermate phase again.
Just keep us updated as you go and I will guide and advise you the best way to go about the next stage
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote