good stuff Doc, more sanding ! It is important you get the bulk of the Dingtone sanded off as I'm not sure if it will react with the primer. Best do a small test in an area under the pickguard to see if the primer takes ok
good stuff Doc, more sanding ! It is important you get the bulk of the Dingtone sanded off as I'm not sure if it will react with the primer. Best do a small test in an area under the pickguard to see if the primer takes ok
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Originally Posted by wokkaboy
I was actually thinking about that when I started sanding the body a few days ago, good job, will do that test before I do anything else to the body, cheers.
This week's going to be pretty full-on for me, cause I'm doing some servicing work on a mate's Peavey Triumph amp, the Channel Footswitching isn't working like it's supposed to so I'm going to try and fix it for him.
I've also got my Pedalboard project to work on too, will document it in a thread in the non-PBG gear section.
Last edited by DrNomis_44; 31-08-2016 at 04:39 PM.
Posting Permissions
Reply With Quote